What Homeowners Should Know About Attic Ventilation

If you have attic ventilation or Michigan roofing service questions, contact Weatherseal Home Improvements at (800) 767-1938 or click here to learn more about us. 

Attic Ventilation Michigan

1.) Attic Ventilation Is Essential

Attic ventilation is an important part of your home’s design and construction.

Attic Ventilation 1• In the summer attic ventilation can help prevent heat buildup, which will help make your living areas cooler and more comfortable, help reduce air conditioning costs and help prevent premature roof shingle deterioration. The major shingle manufacturers require attic ventilation to validate the shingle warranty.

• In the winter attic ventilation can help prevent moisture buildup, which will help prevent wood rot, mold, mildew and poor indoor air quality.

• And because it helps keep the roof deck uniformly cool in the winter, attic ventilation (along with proper attic insulation) can help prevent the uneven freeze/thaw cycle associated with snow on your roof that often leads to ice dams which can back water under shingles causing roof deck and interior surface

Did you know?
The average family of four generates 2 to 4 gallons of water vapor a day through activities such as cooking, cleaning, showering, laundry and breathing. Some of this water vapor rises into your attic. Ventilation helps remove it before it causes problems such as wood rot, wet insulation, mold and mildew. Source: Moisture Control in Buildings, Heinz R. Trechsel

2.) Your Attic Needs Equal Intake and Exhaust Ventilation

Attic Ventilation 2Research has shown that the best way to ventilate an attic is with a balanced system of intake vents low at the roof’s edge or in the soffit/eaves along with exhaust vents high on the roof at or near the ridge. This allows cool, dry intake air at the roof’s edge to flush out any warm, moist air through the exhaust vents.

Be sure your attic has enough intake vents. They are crucial to the attic ventilation system and are often overlooked. Your roofing contractor can help you select intake vents to balance the system including Air Vent’s Edge™ Vent (an edge-of-roof installed, shingle-over intake vent), continuous soffit vents, rectangular undereave vents or vented drip edge products. When using vented soffit panels made by siding manufacturers confirm the amount of airflow they allow and be sure the installer has actually cut the holes in the soffit.

Did you know?
An easy way to ensure that your attic ventilation system is balanced is by using Air Vent’s Edge™ Vent for intake and ShingleVent® II ridge vent for exhaust. Together they are part of The Balanced System® for Optimum Attic Ventilation.

Did you know?
When using an electric-powered attic fan be sure the fan has a thermostat to fight heat in the summer and a humidistat to fight moisture in the winter. Without a humidistat the power fan will only ventilate your attic as the heat builds up. It won’t fight moisture buildup.

3.) Ridge Vents Are the Most Efficient Exhaust Vent for Your Attic

Ridge VentsA ridge vent, which is installed at the peak of your roof, is the best way to provide exhaust ventilation for your attic provided there is sufficient horizontal ridge length. It doesn’t have any moving parts to break. It doesn’t use any electricity to operate. And because it’s installed along the entire peak of your roof, it ventilates the entire underside of the roof deck—as long as there is sufficient intake ventilation low at the roof’s edge or in the soffit/eaves. No other exhaust vent can ventilate the entire roof deck. Select a ridge vent that has an external wind baffle and an internal weather filter. The external wind baffle uses the wind to enhance the vent’s airflow performance by literally pulling air out of the attic similar to the way a wing on an airplane helps lift the plane off the ground. The external baffle also deflects weather elements away from the attic. The internal weather filter provides an extra layer of weather protection against wind-driven rain, snow, debris and insects. Unlike a furnace filter it is not treated with oil so it does not collect dust and will not clog under normal conditions. Air Vent makes several styles of ridge vents that feature the external wind baffle and internal weather filter.

Did you know?
Homes with very little or no horizontal ridge length are still candidates for ridge vents. Air Vent’s HipRidge® Vent is designed for use on the diagonal hips—offering another option besides power fans for hip roofs.

4.) Mixing Two Different Exhaust Vents on Your House Is a Mistake

Mixing Exhaust VentsOne of the most potentially troublesome attic ventilation mistakes is having two different types of exhaust vents on your house—for example, mixing a ridge vent with a powered fan, a roof louver, a gable louver or a wind turbine. Technically, this mistake is called short-circuiting the attic ventilation system. (See illustration on the left.) Here’s what can go wrong during short-circuiting: Because air always follows the path of least resistance and is always looking for the nearest opening, the ridge vent at the peak of your roof could pull its source of intake air from the powered fan, or roof louver, or gable louver or wind turbine (each of which happens to be the closest opening) instead of from the intake vents low at the roof’s edge or in the soffit/eaves. Exhaust vents are not designed to be intake vents. If air enters an exhaust vent, along with it could be rain, snow, dirt and debris right into your attic! Furthermore, the lower portion of the attic is inadequately ventilated. Therefore, don’t mix any two types of exhaust vents on your house if it’s one common attic. Always stick with one system.

Did you know?
Solar-powered fans are an environmentally friendly alternative to traditional power fans. A solar panel collects energy from the sun and drives the motor in the power fan without any ongoing electrical costs to you. There’s no need to hire an electrician or crawl into the attic to install the unit.

5.) Your Roofline Will Look Best if Ridge Vents Are Installed End-to-End

Ridge Vents Installed End to EndShingle-over ridge vents can blend in very nicely with your roofline, especially when matching ridge cap shingles are installed on top of the vent. However, a ridge vent that stops short of the end of the roof creates a less attractive, uneven roofline and reduces curbside appeal in your neighborhood. Maintain the distinctive beauty of your roof by running the ridge vents to the very end of the roof. (See illustrations on the left.)

Did you know?
Indications that your attic might have a ventilation problem include wet or compressed insulation, rusty nails or rust spots that dripped onto your insulation, blackened plywood, mold or mildew inside your attic, curling or cracking shingles, uneven snow melt, and ? icicles at the roof edge.

Did you know?
A whole-house fan installed in a central hallway inside your house can help improve your indoor air quality and can be used as an energy-saving alternative to air conditioning or to augment the use of the air conditioner. source: airvent.com

For more information about attic ventilation or Michigan roofing service, call  Weatherseal Home Improvements at (800) 767-1938.

A New Roof Will Save You Money in Michigan

Contact the Michigan Roofing Contractor you can trust – Weatherseal Home Improvements at (800) 767-1938 today!

A New Roof Will Save On Energy Costs And Add To The Value Of Your Home in Michigan.

Michigan Roofing Contractor

Many homeowners wait until their roof is leaking or notice visible damage before they even begin to think about replacing the roof. This only makes the final cost much higher. Poor insulation and improper ventilation conditions lead to higher energy bills, and even to a higher replacement.

A new roof will increase the beauty of your home, cut your energy bills, and play a major role in your ability to sell your home at your asking price.

Also discuss attic ventilation with your roofing contractor – without it, in the summer, your attic can get so hot that it actually bakes your shingles.

And in the winter, the hot moist air heating your home can get trapped in your attic, causing ice jambs, dry rot, mildew to your roofs structure and decking . This will certainly soak and diminish the effectiveness of your insulation, increase your energy bills, and may even cause moldy and stale air in your entire home. Possibly leading to upper respiratory health issues.

Weatherseal Home Improvements is proud to offer roofing services in Macomb, St. Clair, Oakland, Saginaw, Ingam and Washtenaw counties with a manufacture lifetime warranty and service workmanship guarantee on re-roofing projects.

As a Michigan Roofing Contractor, we offer a wide variety of residential roofing shingle profiles that are as beautiful as they are durable. We have many, textures, colors, and style for your homes dreams, designs,and budgets. At Weatherseal Home Improvements, we will check the attic insulation to make sure it’s up to today’s codes and standards for proper regulation, temperatures for your home, and examine ventilation to ensure mold and mildew won’t grow and damage the underside of your roof. A complete evaluation of your roof will catch even minor problems, so they can be fixed before they get worse.When some of these area are over looked, it will result in problems starting with, manufacture warranties, roof decking, air qualities, respiratory infections and premature failure of material. Click here to learn more about our roofing services. See our excellent BBB standing here. 

View some of our roofing work in Michigan Roofing Contractor projects:



Weatherseal Home Improvements is top rated Michigan Roofing Contractor. Call Today for a FREE ESTIMATE: (800) 767-1938